[{"slug":"pattern-37","file":"models/pattern-37.glb","title":"Pattern 37","code":"MB-1","year":2022,"order":1,"process":"CAD from drawing","description":"Flange with a bored boss, four mounting holes and a side lug, modeled from a drawing as CAD practice.","tris":18738,"size":[134,45,117],"kb":141},{"slug":"bearing-housing","file":"models/bearing-housing.glb","title":"Bearing housing with rotor shaft","code":"MB-2","year":2022,"description":"Split housing with a keyed shaft and rotor sleeve on two rolling bearings. The covers are sealed with O-rings and fastened with twelve M16 screws, and the two upper halves are clamped with four M20 bolts. The assembly has 15 part types. Course design project at RTU.","up":"y","order":2,"drawings":["photos/bearing-housing-drawing.png"],"tris":51556,"size":[380,249.9,230],"kb":322},{"slug":"eur-pallet","file":"models/eur-pallet.glb","title":"1:18 scale EPAL 1","code":"MB-3","year":2026,"order":3,"process":"CAD, 3D-printed mold","description":"Practice model of a EUR pallet. The model is also the basis for a 3D-printed injection mold.","tris":324,"size":[44.4,66.7,8],"kb":4},{"slug":"m14-firing-pin","file":"models/m14-firing-pin.glb","title":"M14 firing pin","code":"MB-4","year":2026,"order":4,"process":"CAD from drawing","description":"Modeled for a client from publicly available drawings.","tris":2772,"size":[5.7,86.5,14.6],"kb":23},{"slug":"casting-form-iso-527-2-1ba","file":"models/casting-form-iso-527-2-1ba.glb","title":"Casting form, ISO 527-2 type 1BA","code":"MB-5","year":2026,"material":"AISI 304 2B","process":"Sheet metal, M4 screw assembly","description":"Resin casting form for six ISO 527-2 type 1BA tensile specimens, 75 × 10 × 2 mm with a 5 mm gauge width. Twelve 2 mm cavity strips in mirrored pairs are fastened with M4 screws to a 3 mm base plate. The strips are removed to demold the specimens.","order":5,"tris":11868,"size":[180,90,5],"kb":68},{"slug":"casting-form-iso-527-2-1bb","file":"models/casting-form-iso-527-2-1bb.glb","title":"Casting form, ISO 527-2 type 1BB","code":"MB-6","year":2026,"material":"AISI 304 2B","process":"Sheet metal, M4 screw assembly","description":"Resin casting form for five ISO 527-2 type 1BB tensile specimens, 30 × 4 × 2 mm with a 2 mm gauge width. Ten 2 mm cavity strips in mirrored pairs are fastened with M4 screws to a 3 mm base plate. The strips are removed to demold the specimens.","order":6,"tris":9812,"size":[75,45,5],"kb":60},{"slug":"casting-form-iso-178","file":"models/casting-form-iso-178.glb","title":"Casting form, ISO 178 flexural bar","code":"MB-7","year":2026,"material":"AISI 304 2B","process":"Sheet metal, M4 screw assembly","description":"Resin casting form for six ISO 178 flexural specimens, 80 × 10 × 4 mm. Twelve 4 mm cavity strips in mirrored pairs are fastened with M4 screws to a 3 mm base plate. The strips are removed to demold the specimens.","order":7,"tris":11196,"size":[180,90,7],"kb":65},{"slug":"casting-form-dma","file":"models/casting-form-dma.glb","title":"Casting form, DMA bar","code":"MB-8","year":2026,"material":"AISI 304 2B","process":"Sheet metal, M4 screw assembly","description":"Resin casting form for five DMA specimens, 40 × 5 × 1.5 mm. Ten 1.5 mm cavity strips in mirrored pairs are fastened with M4 screws to a 3 mm base plate. The strips are removed to demold the specimens.","order":8,"tris":9332,"size":[100,60,4.5],"kb":55},{"slug":"battery-compartment-cover","file":"models/battery-compartment-cover.glb","title":"Battery compartment cover","code":"MB-9","year":2026,"order":9,"process":"Reverse engineering, DLP printing","material":"Phrozen Aqua-Gray 4K resin","description":"Replacement cover for the 2 × AA battery compartment of a laser level. The original part was measured with calipers, and the cover was modeled and printed by DLP. Photos: original in black, printed replacement in gray.","photos":["photos/battery-compartment-cover-1.jpg","photos/battery-compartment-cover-2.jpg"],"tris":14552,"size":[33.8,40,12.9],"kb":106}]